HP XP12000 - Manual (Page 45)

Installation 47
Example # lvdisplay /dev/vg06/lvol1
- - - Logical volume - - -
LV Name /dev/vg06/lvol1
VG Name /dev/vg06
LV Permission read/write
LV Status available/syncd
Mirror copies 0
Consistency Recovery MWC
Schedule parallel
LV Size (Mbytes) 2344
Current LE 586
Allocated PE 586
Stripes 0
Stripe Size (Kbytes) 0
Bad block on
Allocation strict
3. Repeat steps 1 and 2 for each logical volume to be created.
You can create only one logical volume at a time. However, you can
verify multiple logical volumes at a time.
Creating the file systems
Create the file system for each new logical volume on the disk array. The
default file system types are:
• HP-UX OS version 10.20 = hfs or vxfs, depending on entry in the
/etc/defaults/fs file
• HP-UX OS version 11.0 = vxfs
• HP-UX OS version 11.i = vxfs
To create file systems:
1. Use the newfs command to create the file system using the logical
volume as the argument.