Hyundai IT H-CMD7075 - Manual (Page 14)

14
Radio operations
Note: RDS (Radio Data System) service availability varies with areas. Please understand if RDS service is not available in you area,
the following service is not available, either.
Band select
Press the BAND button on the front panel or BND/SYS button on RC repeatedly to select your desired radio band during RADIO
mode: FM1, FM2, FM3, AM1, AM2.
Auto/ Manual tuning
· Manual tuning: Press briefly the SEEK-/+ buttons on the RC or shortly rotate the TUN TRK knob on the panel to select a
station downward or upward step by step.
· Automatic tuning: Press and hold for 2 seconds the SEEK-/+ buttons on the RC or rotate and hold the TUN TRK knob on the
panel, the automatic search will start. It will play when finds the station.
Programming tuner stations
You can store up to a total of 30 radio stations in the memory (18 FM, 12 AM), manually or automatically.
To store a station:
· Select a band (if needed)
· Select a station by SEEK-/+ on the RC.
· Hold a Preset button (1-6) which you want store the station for at least 2 seconds.
To recall a station:
· Select a band (if needed)
· Press a Preset button (1-6) briefly to recall the stored station
APS (Auto memory store/ Preset scan) function
· Preset scan: press APS button on the panel or AMS button on the RC to scan all preset stations in the memory of the current
band and stay on each memory stations for about 5 seconds. To stop preset scan, press this button again. To listen to saved
station press 1-6 buttons.