Hyundai IT H-CMD7075 - Manual (Page 19)

19
Loading/ eject a disc
· Turn the power on.
· Insert the disc with the printed side facing upward into the slot.
· Press EJECT button on the panel to eject the disc.
Inserting the SD/ MMC card/ USB device
Insert the MMC/ SD card or USB device into MMC/ SD compartment or USB socket. Then the playing mode will be changed into
MMC/ SD or USB mode automatically.
The first card/ USB device track playback will start.
Note: When MMC/ SD card and USB device are both inserted into their compartment or socket, the playing mode will be changed
into the mode of the later one.
Playing/ pausing
· When the disc has been already loaded press the PLAY/PAUSE button on the RC to start playback.
· To ensure good system performance, wait until the unit finishes reading the disc information before proceeding.
· Press and hold for 2 seconds the SET/PAU button on the panel or press shortly the PLAY/PAUSE on the RC to pause the
playback. Press again to resume the playback.
Stop playback
During playback press the STOP button to stop playback.
Playing the previous/ next track
During playback press the 9 button on the RC or rotate the TUN TRK knob on the panel anticlockwise to play the previous track.
Press the : button on the RC or rotate the TUN TRK knob on the panel clockwise to play the next track.
Scanning forward and backward
Press and hold the 9 or : button on the RC or rotate and hold the TUN TRK knob on the panel to fast the playing in backward or
forward direction.
Release the button/knob when the desired location is found.