Honeywell DCP552 Mark II - Manual (Page 103)

7 - 2 Parameter Setting List
7-4
NOTE
“PVU (PV1)”, “PVU (PV2), “SPU (CH1)” and “SPU (CH2)” used in the “Factory
Default Settings” and “User Settings” columns in the lists on the following pages
have the following meaning.
PVU (PV1): When the PV1 range type (setup data setting C01 ) is a
thermocouple or resistance temperature detector, the PV1 decimal
point position (setup data setting
C03 ) causes the decimal point
position to change.
When the PV range type is linear, the PV1 linear decimal point
position (setup data setting
C04 ) causes the decimal point position to
change.
For example, in a decimal point position of 1,
–19999 PVU (PV1) becomes –19999.9 and +20000 PVU (PV1)
becomes +2000.0.
PVU (PV2): Like PVU (PV1), a PV2 range type (setup data setting C11 ), a PV2
decimal point position (setup data setting C13 ) and a PV2 linear
decimal point position (setup data setting C14 ) causes the decimal
point position to change.
SPU(CH1) : The SPU decimal point position (setup data setting C65 ) causes the
decimal point position to change.
For example a decimal point position of 2,
–19999 SPU becomes –199.99 and +20000 SPU becomes +200.00.
SPU(CH2) : The SPU decimal point position (setup data setting C68 ) causes the
decimal point position to change.
Chapter 7. PARAMETER SETUP