5 error message list, 9 - 5 error message list – Honeywell DCP552 Mark II User Manual

Page 171

Advertising
background image

9 - 5

Error Message List

9-12

When an error occurs, error messages such as “

Card Error-XX

” (XX denotes error code) are displayed on the

message panel during memory card operations. The table below lists the error codes and explain their meaning.

Memory card operations are aborted when an error occurs.

To return to the normal display mode, press the

DISP key

.

Chapter 9. MEMORY CARD OPERATIONS

Code

Meaning

Remedial measures

1

Card insertion failure or card removed

Do over.

2

Card write protect

Replace the card, or reset the protect by SLP550.

3

Card read protect

Replace the card, or reset the protect by SLP550.

4

Bad card

Replace the card.

5

Invalid card format

Initialize the card.

6

Card full

Erase unnecessary files, or initialize the card.

7

Card busy

Do over.

8

File write protect

Initialize the card.

9

Card access error

Do over.

11

Card access sequence error

Do over.

12

FAT abnormal

Initialize the card.

14

Card access sequence error

Do over.

(in file control)

15

Card battery voltage drop (warning) Replace the card, replace the card battery (If

replaceable).

16

Wrong file version

Create new file, and create new data.

17

Data or file are missing.

Create new file, and create new data.

18

DCP552 data full (program load)

Delete unnecessary programs in the DCP552.

19

DCP552 hardware error (load error)

Do over.

20

Card data invalid

Do over.

21

Card data check sum error

Operate the instrument again, or check

(program data)

the program setting of the DCP552.

22 to 36

Card data check sum error

Operate the instrument again, or check

(parameter data)

the parameter setting of the DCP552.

37

Memory protect error

Set DCP552 variable parameter PA02 to 0 to

(loading the data is protected by the cancel protection.
variable parameter PA02.)

43

No alternate areas remain on the

Replace the card.

E

2

PROM card

44

Error occurred in writing to alternate Replace the card.
area on E

2

PROM card

63

Card battery voltage drop (error)

Replace the card, replace the card battery (If
replaceable).

64

File abnormal (card was removed)

Create new file, and create new data.

Advertising