Honeywell DCP552 Mark II - Manual (Page 223)

14
No. Item code Item Factory default User Settings and descriptions
settings settings
72 tP-A3 Tuning point (PID group A3) 2500 SPU –19999 to +20000 SPU
73 P-A4 Proportional band (PID group A4) 100.0 0.0 to 1000.0%
(0.0: On-off control)
74 I-A4 Integral time (PID group A4) 0 0 to 3600sec
(0: no integral operation)
75 d-A4 Derivative time (PID group A4) 0 0 to 1200sec
(0: no derivative operation)
76 rE-A4 Manual reset (PID group A4) 50.0 0.0 to 100.0%
77 CP-A4 Switching point (PID group A4) 4000 SPU –19999 to +20000 SPU
78 tP-A4 Tuning point (PID group A4) 3500 SPU –19999 to +20000 SPU
79 P-A5 Proportional band (PID group A5) 100.0 0.0 to 1000.0%
(0.0: On-off control)
80 I-A5 Integral time (PID group A5) 0 0 to 3600sec
(0: no integral operation)
81 d-A5 Derivative time (PID group A5) 0 0 to 1200sec
(0: no derivative operation)
82 rE-A5 Manual reset (PID group A5) 50.0 0.0 to 100.0%
83 CP-A5 Switching point (PID group A5) 5000 SPU –19999 to +20000 SPU
84 tP-A5 Tuning point (PID group A5) 4500 SPU –19999 to +20000 SPU
85 P-A6 Proportional band (PID group A6) 100.0 0.0 to 1000.0%
(0.0: On-off control)
86 I-A6 Integral time (PID group A6) 0 0 to 3600sec
(0: no integral operation)
87 d-A6 Derivative time (PID group A6) 0 0 to 1200sec
(0: no derivative operation)
88 rE-A6 Manual reset (PID group A6) 50.0 0.0 to 100.0%
89 CP-A6 Switching point (PID group A6) 6000 SPU –19999 to +20000 SPU
90 tP-A6 Tuning point (PID group A6) 5500 SPU –19999 to +20000 SPU
91 P-A7 Proportional band (PID group A7) 100.0 0.0 to 1000.0%
(0.0: On-off control)
92 I-A7 Integral time (PID group A7) 0 0 to 3600sec
(0: no integral operation)
93 d-A7 Derivative time (PID group A7) 0 0 to 1200sec
(0: no derivative operation)
94 rE-A7 Manual reset (PID group A7) 50.0 0.0 to 100.0%
95 CP-A7 Switching point (PID group A7) 20000SPU 20000 SPU (tied)
(fixed)
96 tP-A7 Tuning point (PID group A7) 6500 SPU –19999 to +20000 SPU
DCP552 Parameter Work Sheet
The settings on this page are PID parameters for CH2