Honeywell DCP552 Mark II - Manual (Page 90)

6-8
● Message key function (when variable parameter PA03 is set to 1)
Cycles through the message panel displays.
• Display D1, display D2, display D3, display D4, display D5, display D6,
display D1.
Handling Precautions
• Models with CP computation compensation the CH2 PV values have
the following meaning depending on variable parameter PA44 settings.
• When PA44 is set to 0: CP value (unit: %) or PO
2
values (unit 10 -20 atm)
• When PA44 is set to 1: millivolt voltage value (unit: mV)
• When PA44 is set to 2: O
2
sensor impedance value (unit: kΩ)
1 8 0 : 0 1
5 to 105% CH1 output value
5 to 105% CH2 output value
-999.9 to 999.9% CH1 deviation value
-999.9 to 999.9% CH2 deviation value
Time value of CH1 time unit
Time value of CH2 time unit
CH2 tag
Displays events 1 to 8 from the left.
Displays events 9 to 16 from the left.
■ indicates that events are on and
_ indicates that they are off.
CH1 tag
The [ ] displays the 8-character program tag.
O U T 1
O U T 2
D E V 1
D E V 2
T 1
T 2
E V E N T
T A G 1 [ P R O G 0 1 ]
T A G 2 [ P R O G 0 1 ]
7 0 . 5 % O U T
2 0 . 4 % O U T
3 . 1 % F S
8 . 6 % F S
0 1 9 : 5 9
1 8 0 : 0 1 0 1 9 : 5 9
1 - 1 6
CH1 PV value
CH2 PV value
P V 1 1 0 1 0 . 2
P V 2 1 1 2 2 . 3
■■ ■
Chapter 6. OPERATION
● Display D1
● Display D2
● Display D3
● Display D4
● Display D5
● Display D6