Getting started, About this manual, Unpacking the imager – Hand Held Products 4600g User Manual
Page 17: Chapter 1 - getting started, About this manual -1 unpacking the imager -1
4600g, 4600r, 4800i User’s Guide
1 - 1
1
Getting Started
About This Manual
This User’s Guide provides installation and programming instructions for the
4000 Series imagers. Product specifications, dimensions, warranty, and
customer support information are also included.
Hand Held Products bar code imagers are factory programmed for the most
common terminal and communications settings. If you need to change these
settings, programming is accomplished by scanning the bar codes in this guide.
An asterisk (*) next to an option indicates the default setting.
Unpacking the Imager
After you open the shipping carton, take the following steps:
•
Check for damage during shipment. Report damage immediately to the
carrier who delivered the carton.
•
Make sure the items in the carton match your order.
•
Save the shipping container for later storage or shipping.