Hand Held Products 4600g - Manual (Page 40)

2 - 8 4600g, 4600r, 4800i User’s Guide
Control + ASCII Mode On: The imager sends key combinations for ASCII
control characters for values 00-1F. Refer to Keyboard Function
Relationships , page 10-1 for CTRL+ ASCII Values. Default = Off
Turbo Mode: The imager sends characters to a terminal faster. If the terminal
drops characters, do not use Turbo Mode. Default = Off
Numeric Keypad Mode: Sends numeric characters as if entered from a
numeric keypad. Default = Off
Automatic Direct Connect Mode: This selection can be used if you have an
IBM AT style terminal and the system is dropping characters. Default = Off
Control + ASCII Mode On
* Control + ASCII Mode Off
Turbo Mode On
* Turbo Mode Off
Numeric Keypad Mode On
* Numeric Keypad Mode Off
Automatic Direct
Connect Mode On
* Automatic Direct Connect
Mode Off