Hand Held Products 4600g - Manual (Page 56)

3 - 8 4600g, 4600r, 4800i User’s Guide
Reread Delay
This sets the time period before the imager can read the same bar code a second
time. Setting a reread delay protects against accidental rereads of the same bar
code. Longer delays are effective in minimizing accidental rereads. Use shorter
delays in applications where repetitive bar code scanning is required.
Default =
Medium.
Reread Delay only works when in Presentation Mode or Streaming
Presentation™ Mode (page 3-7).
User-Specified Reread Delay
If you want to set your own length for the reread delay, scan the bar code below,
then set the delay (from 0-30,000 milliseconds) by scanning digits from the inside
back cover, then scanning
Save .
Short (500 ms)
* Medium (750 ms)
Long (1000 ms)
Extra Long (2000 ms) Extra Long (2000 ms)
User-Specified Reread Delay