Honeywell NIAGARA WEB-700 User Manual

Page 4

Advertising
background image

WEB-700 WEB-700-O CP-700

95-7776—03

4

.

Fig. 2. WEB/CP-700 main controller board and 2 option cards uninstalled.

As a 7 series controller, the WEB/CP-700 uses a PowerPC 440EPx processor, 1GB Flash storage, and 1 GB DDR-2 RAM. TCP/

IP access is via two standard Gigabit Ethernet ports. Serial communications ports (RS-232, RS-485) are standard.

One or two option cards can be added for additional communications, e.g. LonWorks FTT-10, or another RS-232 port. A MiniPCI

slot is also available for WiFi 802.11g support. The WEB/CP-700 uses the QNX Neutrino operating system, with the Oracle Java

Hotspot VM (Virtual Machine).

Two status LEDs are visible atop the cover. Integral contact inputs are provided to allow system monitoring of UPS power and

battery, and an external enclosure door. A rechargeable NiMH battery pack is included inside the unit, and a separate connector

provides recharging and monitoring of an external 12V sealed lead-acid battery ordered separately.

The table below provides a summary of features of the WEB/CP-700 controller model.

.

Table 1. WEB/CP-700 features and options

Model

Description

Ports

WEB-700-O

CP-700

DIN-mountable controller. PowerPC 440Epx 667MHz processor, 1GB NAND

Flash storage, 1 GB base DDR-2 system RAM.

Includes integral NiMH battery pack, two open enhanced comm option card

slots, one open MiniPCI slot (for WiFi 802.11g option card). Not furnished is

NPB-PWR-UN-H universal power supply, or external 12V sealed lead-acid

battery and harness.

Two 1GB Ethernet,

RJ-45

One RS-232 Serial,

DB-9 male

One RS-485 Serial,

isolated, with 15V/

12Vdc power, 6-

position plug on right

side.

Main controller board

Removed

option cards

DIN-mount base with screw tabs

for panel mount

Connector ports

NiMH battery pack

and shield removed

Advertising
This manual is related to the following products: