Honeywell HEGS5001 User Manual
Page 31
Table 1. Manual Control, Continued
Function
Description
Freeze Video (
)
Press the Freeze Video (
) key to freeze or unfreeze the current
video scene. When the video is frozen, an asterisk is displayed in the
bottom left corner of the display and the camera remains on the current
scene until the operator unfreezes the video. An operator can manually
control the camera or send the camera to a PreShot, but the video
display does not change. When the video is unfrozen, the scene the
camera is viewing is outputted on the video signal.
The flashback function provides the user with the ability to quickly
return to a scene of interest. Each time the flashback function is
invoked, the scan returns to the scene viewed immediately prior to
when the flashback was invoked previously. Refer to the KD6/HD6
User Manual for more detailed operation.
Flashback (
)
Sends the Esc command to the KD6/HD6. Press to exit on-screen
setup menus. After all menus have been exited, you can press
Clear/Manual (
) 4 times to reset the KD6/HD6 through the
software.
Clear/Manual (
)
Rev. 1.01
21 900.0800
19-Jun-06