Honeywell HEGS5001 - Manual (Page 38)

5.2.2 Program PreShot, Continued
g. Press the +/- key until upper case D is displayed on the controller LCD and then
press Character Select (
ABC
).
h. Press the +/- key until lower case o is displayed on the controller LCD and then
press Character Select (
ABC
).
i. Press the +/- key until lower case o is displayed on the controller LCD and then
press Character Select (
ABC
).
j. Press the +/- key until lower case r is displayed on the controller LCD and then
press Character Select (
ABC
).
k. Press the Enter ( ) key.
8. Press the +/- key until upper/lower case S is displayed on the controller LCD and
then press Character Select (
ABC
).
9. Program another PreShot or press Clear/Manual ( ) to exit.
10. Press Dome Menu (
1. ___
3. ___ ) or press Menu Esc (
1. ____
2. ____
3. ____
)three times to exit the menus
on the controller LCD.
5.2.3 Recall PreShot
The first 10 PreShots (Views) are available as scratchpad PreShots. These can be saved
and recalled by the operator. PreShots (Views) 11-99 can only be recalled by the
operator and not saved.
To recall a PreShot or view, enter the PreShot number (0-99) using the numeric
keypad and press the PreShot (
) key.
Example: To recall PreShot 11:
1. Press 1
2. Press 1 again.
3. Press PreShot ( ).
Rev. 1.01
28 900.0800
19-Jun-06