2 program preshot, continued – Honeywell HEGS5001 User Manual
Page 36
5.2.2 Program
PreShot,
Continued
6. Press
the
Enter (
) key. The following is displayed on the controller’s LCD.
Rev. 1.01
26 900.0800
19-Jun-06
Follow the on-screen prompts that appear on the monitor where the KD6/HD6 video
is viewed.
7. Enter the PreShot number (0-99) using the numeric keypad and press the Enter
(
) key. If the selected PreShot# has already been programmed the PreShot title
is displayed. To accept the existing title, press Enter (
). To change the current
title proceed to step 8.
Note: PreShot 99 is reserved for controlling the Nightshot mode if this feature is
available on the dome and cannot be programmed. For domes without the
nightshot feature, PreShot 99 can be programmed.
8. Enter the desired title by performing the following steps.
a. Press
the
+ or – key until the desired character is displayed on the LCD screen,
and then press Character Select (
ABC
). The controller sends the character to
the KD6/HD6.
b. Continue selecting characters and pressing Character Select (
ABC
) until the
desired title is displayed on the monitor.
c. Press
Enter (
). The following options are displayed on the monitor:
C to Change name
location
Press + or – key until C is displayed on the LCD and
press Char Select. Use the up or down arrow keys to
reposition the PreShot title on the monitor screen.
E to Edit PreShot
Press + or – key until E is displayed on LCD and press
Char Select. Reposition the PTZ and/or change the lens
settings, then repeat steps 6 and 7.
D to Delete PreShot
Press + or – key until D is displayed on LCD and press
Char Select. The PreShot # entered in step 6 is deleted.
S to Save PreShot
Press + or – key until S is displayed on LCD and press
Char Select. The current PTZ and lens (focus and iris)
settings are saved for the PreShot # entered in step 6.
N to Save Name only
Press + or – key until E is displayed on LCD and press
Char Select. This option is used for renaming PreShots.
The title only entered in step 7 is saved for the PreShot
# entered. The current PTZ and iris settings of the
dome are not saved.
A
< Select Function >