2 program preshot, continued – Honeywell HEGS5001 User Manual
Page 37
5.2.2 Program
PreShot,
Continued
9. Press
the
+ or – key until the character for the desired action is displayed on the
LCD and Press Character Select (
ABC
). Refer to the above table for the required
steps after selecting a character.
10. Program another PreShot by repeating steps 7 through 9 or press Clear/Manual
(
) to exit the PreShot Programming menu.
11. Press Dome Menu (
1. ___
3. ___
) or press Menu Esc (
1. ____
2. ____
3. ____
) three times to exit the menu
on the controller LCD.
Example: Program PreShot 1 titled Front Door in Camera 1
1. Select camera 1.
a. Press
the
1 key
b. Press
the
Camera (
) key
2. Position camera 1 to the desired PreShot position (pan, tilt, zoom, focus, iris)
3. Press
the
Dome Menu (
1. ___
3. ___
) key.
4. Press
+ or – until PreShot Menu is displayed on the LCD and press Enter (
).
5. Press
+ or – until Program is displayed on the LCD and press Enter (
).
6. Press
the
1 key and press Enter (
).
7. Program the title.
a. Press
the
+/- key until upper case F is displayed on the controller LCD and then
press Character Select (
ABC
).
b. Press
the
+/- key until lower case r is displayed on the controller LCD and then
press Character Select (
ABC
).
c. Press
the
+/- key until lower case o is displayed on the controller LCD and then
press Character Select (
ABC
).
d. Press
the
+/- key until lower case n is displayed on the controller LCD and then
press Character Select (
ABC
).
e. Press
the
+/- key until lower case t is displayed on the controller LCD and then
press Character Select (
ABC
).
f. Press
the
+/- key until Space is displayed on the controller LCD and then press
Character Select (
ABC
).
Rev. 1.01
27 900.0800
19-Jun-06