11 delete a tour, 12 programming sector ids, Delete a tour – Honeywell HEGS5001 User Manual

Page 44: Programming sector ids

Advertising
background image

5.2.11 Delete a Tour

1. Press

the

Dome Menu (

1. ___

3. ___

) key.

2. Press

+ or – until Tour Menu is displayed.

3. Press

Enter (

).

4. Press

+ or – until Delete is displayed.

5. Press

Enter (

).

6. Enter the desired tour # (1-3) using the numeric keys.

7. Press

Enter (

).

5.2.12 Programming Sector IDs

Sector IDs are used for labeling specific areas that the PTZ camera views. Whenever a
PTZ camera is under manual control and it is viewing a programmed sector, the name
given that sector is added to the video signal.

Note: The camera ID display must be enabled. When an operator is viewing the monitor

or a video recorder is recording a specific dome, this labeling provides a quick
reference for the area being displayed. Up to 16 Sector IDs can be programmed

for each Scan Unit.

1. Press

the

Dome Menu (

1. ___

3. ___

) key.

2. Press + or - until Sector/Priv Menu is displayed.

3. Press

Enter (

).

4. Press

+ or – until Program is displayed.

5. Press

Enter (

).

6. Enter the desired sector number (0-15) to program.

7. Press

Enter (

).

Rev. 1.01

34 900.0800

19-Jun-06

Advertising
This manual is related to the following products: