12 programming sector ids, continued – Honeywell HEGS5001 User Manual

Page 45

Advertising
background image

5.2.12 Programming Sector IDs, continued

8. Enter the Sector title (up to 24 characters)

a. Press

the

+ or – key until the desired character is displayed on the LCD screen,

and then press Character Select (

ABC

). The controller sends the character to

the KD6/HD6.

b. Continue selecting characters and press Character Select (

ABC

) until the

desired title is displayed on the monitor.

c. Press

Enter (

).

The following options are displayed on the monitor:

E to Edit Sector

Press + or – key until E is displayed on LCD and
press Char Select. Repeat step 8.

D to Delete Sector

Press + or – key until D is displayed on LCD and
press Char Select. The Sector # entered in step
6 is deleted.

S to Save Sector Coord.

Press + or – until S is displayed on LCD and
press Char Select. Follow instructions in step 9.

N to Save Name only

Press + or – key until N is displayed on LCD and
press Char Select. This option is used for
renaming Sector IDs. The title only entered in
step 8 is saved for the Sector # entered. The

current sector coordinates are not changed.

9. Press

+ or – until the character for the desired action is displayed on the LCD and

then press Character Select (

ABC

).

To save Sector coordinates, press + or – until S is displayed on the LCD and press

Character Select (

ABC

). Refer to the diagram below for programming

coordinates.

Right pan
Top tilt

Bottom tilt
Left pan

a. Using the joystick, move the PTZ so the lower left corner of the sector is

centered on the monitor, then press Enter (

).

Rev. 1.01

35 900.0800

19-Jun-06

Advertising
This manual is related to the following products: