Honeywell HEGS5001 - Manual (Page 49)

5.2.13.2 Programming/Editing/Deleting Privacy Zones, Hitachi Camera
To program privacy zones in a KD6/HD6 with a Sony camera:
1. Press the Dome Menu (
1. ___
3. ___
) key.
2. Press + or - until Sector/Priv Menu is displayed.
3. Press Enter ( ).
4. Press + or – until Program is displayed.
5. Press Enter ( ).
6. Press + or - until P is displayed on the controller LCD.
7. Press Enter ( ).
8. Enter the password. (The factory set password is blank. Just press Enter ( ) to
submit a blank password.)
a. Press the + or – key until the desired character is displayed on the LCD screen,
and then press Character Select (
ABC
). The controller sends the character to
the KD6/HD6.
b. Continue selecting characters and press Character Select (
ABC
) until all the
characters in the password have been sent to the KD6/HD6. The characters will
appear as astericks (*) on the monitor display for security purposes.
c. Press Enter ( ).
9. Enter the desired privacy number (1 or 2) to program.
10. Press Enter ( ). Factory set
password
11. Enter the Privacy title (up to 24 characters)
a. Press the + or – key until the desired character is displayed on the LCD screen,
and then press Character Select (
ABC
). The controller sends the character to
the KD6/HD6.
b. Continue selecting characters and pressing Character Select (
ABC
) until the
desired title is displayed on the monitor.
Rev. 1.01
39 900.0800
19-Jun-06