Honeywell HD4UX - Manual (Page 10)

10
Connecting Cables Through the Side Conduit
1. Peel back the bottom flat gasket below the side conduit just enough to expose the security
screw.
2. Use the supplied Allen key to loosen and remove the security screw (see Figure 2 ).
3. Use a flat screwdriver to unscrew the conduit plug.
4. Pull the cables through the hole.
5. Apply appropriate sealant around the opening to prevent moisture from entering the
housing.
Figure 2 Cable Connection Through Side Conduit
security screw
Allen key
(supplied)
side conduit