Optimizing the camera setup – Honeywell HD4UX User Manual

Page 17

Advertising
background image

Document 800-00031 Rev A

17

04/08

Optimizing the Camera Setup

Note

This menu is for advanced users only.

The table below explains the options on the CAMERA SETUP menu. Each selection on this
menu takes you to a separate screen (see description below).

<AES>

The AES (Automatic Electronic Shutter) feature compensates for excessive light levels by
automatically adjusting the shutter speed of the camera. Select from:

HIGHLIGHTS for optimum exposure of bright areas of the scene.

SHADOWS for optimum exposure of dark areas of the scene.

DIG SLOW
SHUTTER

Digital Slow Shutter. Select a shutter speed, from x2 to x32. Notice that the AGC value
changes accordingly. (For more about AGC, see page 18.)

> CUSTOM.

Opens the SLOW SHUTTER SETUP menu where you select the optimum exposure
adjustment. Shutter mode options are:

SHUT PRI (Priority) to select the sensitivity LIMIT from 0 to 60 (26 is the default), or the
sensitivity THRESHOLD from 22 to 34 (22 is the default). See figure on left.

GAIN PRI (Priority) to adjust the noise LIMIT in the image, from 0 to 60 (26 is the
default), or adjust the gain THRESHOLD from 28 to 42 (28 is the default).

MANUAL to manually set the sensitivity LIMIT from 0 to 60 (26 is the default).

>

CAMERA SETUP

DIG SLOW SHUTTER

X2 ..

SYNC MODE ..

LL ..

AGC

26 dB

WHITE BALANCE ..
AI THOLD -18 -42

60

!

SLOW SHUTTER SETUP

SHUT MODE

SHUT PRI ..

PREVIOUS PAGE .

AUTO SHUTTER--SHUT PRI

LIMIT

0

26

60

THRESHOLD

22

22

34

PREVIOUS PAGE .

>

>

!

!

Advertising
This manual is related to the following products: