HP procurve J8164A - Manual (Page 25)

Planning
Planning Your PoE Configuration
With an HP 600 RPS/EPS Powering Two Modules
In this example there are two modules connected to the HP 600 RPS/EPS,
therefore each module will be supplied with 184 watts of PoE power to be
distributed to each modules 24 ports at 7.6 watts per port.
Plan
ning
��� ��� ��� ��� ������ �������� ���� ����� ��� �� � �� � ��� ������ �������� ���� �����
Source of
Power
Watts
Available
# of Ports Powered and
Average Watts/Port
Redundant # of Ports
Powered and Average Watts/
Port
External PoE
Power
Supply 184/each
module 24 @ average 7.6 W each None
3-9