Activating the station, Deactivating the station, Confirm inlet setup – Honeywell MicroDock II User Manual

Page 10

Advertising
background image

MicroDock II
Quick Reference Guide

8

The base station pushbuttons are not labelled. The base station
is operated by pressing the C pushbutton that is located
directly below the option that displays on the LCD.

Activating the Station

1.

To activate the station, press and hold C (the left-
most button) until the following screen displays.

The normal operation screen then displays.

Deactivating the Station

To deactivate the station, complete the following:

1.

Access the normal operation screen (the station can
only deactivate from the normal operation screen).

2.

Press C off.

Confirm Inlet Setup

For initial station activation, ensure the inlets are installed cor-
rectly.

• Inlet 1—default connection for ambient air.
• Inlet 2—default connection for four-gas mix (unless oth-

erwise specified when purchased).

• Inlets 3-5—designed connection for additional gases.

However, unless specified at purchase, inlets 3-5 will be
configured for ambient air.

a

Warning

Failed bump tests and calibrations can result if the inlets
are not setup correctly.

To confirm that the inlets are set correctly, complete the follow-
ing:

1.

Press C menu to access the user options menu.

2.

Press C or to scroll to InletSetup.

3.

Press C sel to access the inlet 1 screen.

4.

Press the C

to scroll to the inlet 2, 3, 4, and 5

screens.

Advertising