HONDA Outboard Motor BF75A - Manual (Page 101)

99
WITH OUTBOARD MOTOR
INSTALLED ON BOAT WITH OUTBOARD MOTOR
REMOVED FROM BOAT
LHT Type (tiller handle)
LRT and XRT Types (remote
control)
All Types
TRANSPORTING
MOTOR SUPPORT BAR
(commercially available)
STEERING FRICTION ADJUSTER
When trailering a boat with the
outboard motor attached, leave the
engine in the normal running position,
if possible.
Tighten the steering friction adjuster
to prevent the outboard motor from
moving while trailering the boat.
Use a motor support bar to prevent
the outboard motor from moving
while trailering the boat. Refer to the
manufacturer’s instructions for using
a motor support bar.
If there is insufficient road clearance
in the normal running position, then
tilt the outboard motor and use a
motor support bar, or remove the
outboard motor from the boat. Refer
to the manufacturer’s instructions for
using a motor support bar.
Secure the outboard motor in either
the vertical or horizontal position
shown on p.
.
The lifting eye (contact your
authoraized Honda Marine dealer to
purchase) must be installed to attach
a hoist hook for moving the outboard
motor on and off the transport
vehicle. Refer to p.
for hoisting
instructions.
98
96
02/03/25 21:34:32 31ZW0601_100