HONDA EM6500is - Manual (Page 89)

87
ASSEMBLY
Engine Oil
WITHOUT OIL
Fuel
SAE Viscosity Grades
AMBIENT TEMPERATURE
OIL FILLER HOLE
UPPER LIMIT
FILLER CAP/
DIPSTICK
The generator is shipped
in the engine.
Place the generator on a level
surface. Add enough of the
recommended oil to bring the
oil level to the top of the oil
filler neck.
Refer to page .
Do not overfill the engine
with oil. If the engine is
overfilled, the excess oil may
get transferred to the air
cleaner housing and air filter.
SAE 10W-30 is recommended
for general, all-temperature
use. Other viscosities in the
chart may be used when the
temperature in your area is
within the indicated range.
Use a 4-stroke motor oil that
meets the requirements for
API service category SJ or
later (or equivalent).
59
07/03/13 16:34:29 31Z11600_088