HoMedics BPA-100 - Manual (Page 13)

24 23
normal body temperature.
• Do not move or talk during measurement as this
can elevate readings.
• Do not move or cross legs during measurement.
Keep feet flat on floor.
• Do not touch cuff or monitor during
measurement procedure.
• It is suggested that you take your measurements
at the same time each day and use the same arm
for consistency.
• Users should wait a minimum of 5 minutes before
taking additional measurements. More time may
be necessary depending upon your physiology.
• The measurement results that users receive
are for reference only. If users have any blood
pressure concerns, please consult a physician.
• Once inflation reaches 300 mmHg, the unit will
deflate automatically for safety reasons.
• This product is not suitable for people with
arrhythmias.
• This device may have difficulty determining the
proper blood pressure for users with diabetes,
poor circulation of blood, kidney problems, or
for users who have suffered a stroke.
CLEARING VALUES FROM MEMORY
1. Press the User-Select button to select
User 1 or User 2.
2. Continue to press
the “M” button for
approximately 5 seconds,
then the data for the
selected user will be
erased automatically.
Note: The data stored in memory for both users may
be erased if any of the batteries are removed or
if the power source is lost when using an AC
adapter. (Users should first record the data in a
Blood Pressure log before replacing or removing
batteries or power source.)
IMPORTANT NOTES REGARDING YOUR BLOOD
PRESSURE MEASUREMENT
•
Take your reading in a comfortable environment as
measurements can be affected by hot or cold
temperatures. Take your blood pressure at
/
BPA-100IB_ENGSP.qxd 10/24/05 10:51 AM Page 23