Gui contrast controls, Power, 43 move media screen (two-drive model shown) – HP MSL6000 Series User Manual
Page 57: Figure 43
MSL6000 series tape library user guide
57
CAUTION:
Remove media from all drives and slots prior to library transport.
Figure 43
Move media screen (two-drive model shown)
GUI Contrast Controls
Select these options to increase or decrease the contrast of the GUI display (see
).
Incremental steps are set by adjusting the GUI contrast controls from the library Status screen.
Incremental steps can range from 0 to 31 depending on your preference. These settings are volatile
and are restored to default values upon reboot or power cycling.
Power
Select this option to initiate a library power-down operation. After a successful power-down, a
confirmation message appears (see
NOTE:
After you power-down the library, you must power it back up through the GUI display.
NOTE:
The library moves the shuttle assembly to the parked position before powering down. This
position is a prerequisite for any library transport.