Honeywell 2020 - Manual (Page 104)

6 - 16
Code 128, continued
ISBT 128 Concatenation
In 1994 the International Society of Blood Transfusion (ISBT) ratified a standard
for communicating critical blood information in a uniform manner. The use of
ISBT formats requires a paid license. The ISBT 128 Application Specification
describes 1) the critical data elements for labeling blood products, 2) the current
recommendation to use Code 128 due to its high degree of security and its
space-efficient design, 3) a variation of Code 128 that supports concatenation
of neighboring symbols, and 4) the standard layout for barcodes on a blood
product label. Use the barcodes below to turn concatenation on or off.
Default
=Off.
Code 128 Message Length
Scan the barcodes below to change the message length. Refer to Message
Length on page 6-2 for additional information. Minimum and Maximum
lengths = 0-80. Minimum Default = 0, Maximum Default = 80.
Code 128 Code Page
Code pages define the mapping of character codes to characters. If the data
received does not display with the proper characters, it may be because the
barcode being scanned was created using a code page that is different from
the one the host program is expecting. If this is the case, scan the barcode
below, select the code page with which the barcodes were created from the
chart,
Code Page Mapping of Printed Barcodes on page A-4, and scan the
value and the SAVE barcode from the Programming Chart inside the back
cover of this manual. The data characters should then appear properly.
* Off
On
Minimum Message Length
Maximum Message Length
Code 128 Code Page