Gs1 databar expanded, Gs1 databar expanded message length, Gs1 emulation – Honeywell 2020 User Manual
Page 118: Gs1 databar expanded -30, Gs1 databar expanded message length -30, Gs1 emulation -30
6 - 30
GS1 DataBar Expanded
GS1 DataBar Expanded Message Length
Scan the barcodes below to change the message length. Refer to
on page 6-2 for additional information. Minimum and Maximum
lengths = 4-74. Minimum Default = 4, Maximum Default = 74.
GS1 Emulation
The imager can automatically format the output from any GS1 data carrier to
emulate what would be encoded in an equivalent GS1-128 or GS1 DataBar
symbol. GS1 data carriers include UPC-A and UPC-E, EAN-13 and EAN-8,
ITF-14, GS1-128, and GS1-128 DataBar and GS1Composites. If GS1-128
Emulation is selected, the AIM Symbology Identifier will be reported as “]C1”. If
GS1 DataBar Emulation is selected, the AIM Symbology Identifier will be
reported as “]e0.” Any application that accepts GS1 data can be simplified
since it only needs to recognize one data carrier type.
Default = GS1 Emulation
Off.
* On
Off
Minimum Message Length
Maximum Message Length
GS1 DataBar Emulation
128 Emulation
* GS1 Emulation Off