HP LTO 4 SAS - Manual (Page 23)

HP LTO Ultrium 4 drives technical reference manual, volume 5: UNIX, Linux and OpenVMS configuration guide 21
4 HP (Tru64 5.1x) servers and workstations
NOTE: Only SCSI drives are supported on Alpha Server systems.
Determining attached devices
After connecting the tape drive to your system, boot TRU64 and check for the presence of the new
tape device. Execute the following commands
# hwmgr -scan scsi
hwmgr: Scan request successfully initiated
# hwmgr -v d
HWID: Device Name Mfg Model Location
--------------------------------------------------------------------
4: /dev/dmapi/dmapi
5: /dev/scp_scsi
6: /dev/kevm
149: /dev/disk/dsk0c COMPAQ BD03685A24 bus-2-targ-0-lun-0
150: /dev/disk/dsk1c COMPAQ BD03664553 bus-2-targ-1-lun-0
151: /dev/disk/cdrom0c TEAC CD-W216E bus-3-targ-0-lun-0
152: /dev/random
153: /dev/urandom
237: /dev/ntape/tape0 HP Ultrium 4-SCSI bus-1-targ-3-lun-0
What next?
Once device files have been created, you should confirm that your new tape drive is working
properly. Please consult your Tru64 operating system documentation and Chapter 8 on page 37 for
instructions on testing your installation.