HP LTO 4 SAS - Manual (Page 7)

HP LTO Ultrium 4 drives technical reference manual, volume 5: UNIX, Linux and OpenVMS configuration guide 5
Maintenance and troubleshooting
Dealing with errors
LTO Ultrium features
FC Drives SCSI Drives SAS Drives
Cleaning 2 SW Integration: ch. 5
2 SW Integration: ch. 7
External drives n/a 1 HW Integration: ch. 5
In Libraries 1 HW Integration: ch. 1
In Servers n/a 1 HW Integration: ch. 4
In Tape Arrays n/a 1 HW Integration: ch. 3 n/a
Monitoring drive and tape condition 2 SW Integration: ch. 7
Software troubleshooting techniques 2 SW Integration: ch. 1
FC Drives SCSI Drives SAS Drives
Error Codes 1 HW Integration: ch. 6 1 HW Integration: ch. 10
Handling errors 2 SW Integration: ch. 5
Logs—see the LOG SENSE command 3 Host Interface: ch. 4
Recovering from write and read errors 2 SW Integration: ch. 7
Software response to error correction 2 SW Integration: ch. 3
Software response to logs 2 SW Integration: ch. 3
TapeAlert log 2 SW Integration: ch. 7
FC Drives SCSI Drives SAS Drives
Autoload 1 HW Integration: ch. 2
Automation Control Interface (ACI) 1 HW Integration: ch. 2
Cartridge Memory (LTO-CM) 1 HW Integration: ch. 2
2 SW Integration: ch. 5
Data Compression, managing 2 SW Integration: ch. 5
OBDR and CD-ROM emulation 2 SW Integration: ch. 7
Performance optimization n/a 1 HW Integration: ch. 8
2 SW Integration: ch. 1
Performance, factors affecting 2 SW Integration: ch. 4
Software design 2 SW Integration: ch. 1
Supporting LTO Ultrium features 2 SW Integration: ch. 5