Code 93 message length, Code 93 -10, Code 93 – Honeywell 3800gPDF User Manual

Page 76

Advertising
background image

7 - 10

3800g/3800gHD/3800gPDF User’s Guide

Code 93

< Default All Code 93 Settings >

Code 93

Code 93 Message Length

Scan the bar codes below to change the message length. Refer to

Message

Length

on page 7-2 for additional information. Minimum and Maximum

lengths = 0-80. Minimum Default = 0, Maximum Default = 80.

Code 93 Code Page

Code pages define the mapping of character codes to characters. If the data
received does not display with the proper characters, it may be because the bar
code being scanned was created using a code page that is different from the
one the host program is expecting. If this is the case, scan the bar code below,
select the code page with which the bar codes were created from the chart,

Code Page Mapping of Printed Bar Codes

on page A-4, and scan the value and

the SAVE bar code from the

Programming Chart

inside the back cover of this

manual. The data characters should then appear properly.

* On

Off

Minimum Message Length

Maximum Message Length

Code 93 Code Page

Advertising
This manual is related to the following products: