HP 470 series - Manual (Page 53)

Transporting the printer
It is easy to transport and set up the printer almost anywhere. Take it with you on
vacations and to family gatherings and social events to instantly print and share
photos with family and friends.
To make it even easier to print on the go, you can purchase these accessories:
HP Photosmart Internal Battery: Power the printer with a rechargeable battery so
you can print anywhere
To transport the printer
1.
Turn off the printer.
2. Remove the memory card from the memory card slot.
3. Remove all paper from the In and Out trays, then close the In and Out tray doors.
4. Push the printer screen down into the flat position.
Note Make sure the printer completes its power-down cycle before you
unplug the power cord. This allows the printer to store the print cartridge
properly.
5. Unplug the power cord.
6. If the printer is connected to a computer, disconnect the USB cable from the
computer.
7. Always carry the printer upright.
Note Do not remove the print cartridge when transporting the printer.
Tip The printer has a convenient built-in handle to make it easy to carry.
Do not shake or swing the printer while carrying it by the handle.
Make sure to bring the following items with you:
●
HP Photo Paper
● Power cord
● Digital camera or a memory card containing photos
● Extra print cartridges (if you plan to print a lot of photos)
● Optional printer accessories you plan to use, such as the battery or HP Bluetooth
wireless printer adapter
● The USB cable and HP Photosmart printer software CD, if you are going to
connect the printer to a computer
● Printer User's Guide (the book you are reading)
Note If you do not take the printer user guide with you, be sure to write
down the correct print cartridge numbers for the country/region you plan to
visit or purchase enough print cartridges before you go.
Chapter 5
48 HP Photosmart 470 series