Establishing communication, Between the scanner and the access point device – Honeywell FocusBT AP-010-BT User Manual

Page 11

Advertising
background image

7

E

STABLISHING

C

OMMUNICATION

Between the Scanner and the Access Point Device

To establish communication between the scanner and access point device:

1. Connect the access point device to the host system (see pages 5 - 6).

2. Scan the address bar code on the access point device to establish a

communication connection between the scanner and the access point

device.

Figure 10. Address Bar Code

3.

If successful, the scanner will respond with two beeps and the LED's on

both the scanner and access point device will stop flashing.

Important Note:
The communication link between the scanner and the
access point device is determined by the last address
code scanned.

Advertising
This manual is related to the following products: