Honeywell ISM BAND XYR 5000 LINE - Manual (Page 43)

Appendix A Navigating the Menus
Pressing either the NEXT or ENTER buttons located on the front of the Transmitter or
Base Radio just below the Liquid Crystal Display (LCD) screen is all that is needed to
navigate the respective menus. Pressing both of these buttons for one second will turn
the unit on.
Pressing the NEXT button at any time while the Base Radio is cycling through the normal
messages causes the Base Radio to enter the setup mode. The NEXT button is then
used to step through menu options, and the ENTER button is used to enter a submenu of
what is displayed on the LCD at that time. If no button is pressed within a 30 second
period the unit goes back to the normal display mode.
If you enter a submenu that requires a numerical input, such as 001, the leftmost 0 will be
blinking. This indicates that pressing the NEXT button will increment this value with each
press from 0 to 9 and back to 0 again. Pressing the ENTER button will move to the next
available value. If the last value is blinking, pressing ENTER will save the entered values
and return to the return from the sub menu.
36