Honeywell MV876B1018 F76S - Manual (Page 2)

F76S WATER FILTERS AND MV876B AUTOMATIC-BACKWASH CONTROLS
62-3015—4 2
ORDERING INFORMATION
When purchasing replacement and modernization products from your TRADELINE® wholesaler or distributor, refer to the
TRADELINE® Catalog or price sheets for complete ordering number.
If you have additional questions, need further information, or would like to comment on our products or services, please write or
phone:
1. Your local Home and Building Control Sales Office (check white pages of your phone directory).
2. Home and Building Control Customer Logistics
Honeywell Inc., 1885 Douglas Drive North
Minneapolis, Minnesota 55422-4386 (612) 951-1000
In Canada—Honeywell Limited/Honeywell Limitée, 155 Gordon Baker Road, North York, Ontario M2H 3N7.
International Sales and Service Offices in all principal cities of the world. Manufacturing in Australia, Canada, Finland, France,
Germany, Japan, Mexico, Netherlands, Spain, Taiwan, United Kingdom, U.S.A.
SPECIFICATIONS
F76S:
Models:
Water filters with 100 micron screens and hose connections.
F76S1007: 1/2 in. sweat and NPT threaded tailpieces.
F76S1015: 3/4 in. sweat and NPT threaded tailpieces.
F76S1023: 1 in. sweat and NPT threaded tailpieces.
F76S1031: 1-1/4 in. sweat and NPT threaded tailpieces.
F76S1049: 1-1/2 in. NPT threaded tailpieces.
F76S1056: 2 in. NPT threaded tailpieces.
Dimensions: See Fig. 1.
Materials of Construction:
Body: Brass.
Screen: Stainless Steel.
Internal Construction: Acetal Copolymer.
Seals: NBR.
Ball Valve: Brass with PTFE Seals.
Sump: Engineered Plastic.
NOTE: Bronze sump available.
Inlet Pressure:
Minimum: 22 psi (with unrestricted backwash discharge).
Maximum:
Plastic Sump: 232 psi.
Bronze Sump: 400 psi.
NOTE: Pressures above 200 psi require an inlet pressure
gauge with a range wider than the standard.
Differential: Maximum Recommended: 42 psi.
Operating Pressure Drop: Maximum Recommended: 3 psi
(with clean screen).
Temperature (maximum):
Plastic Sump: 104°F (40°C).
Bronze Sump: 158°F (70°C).
Pipe Sizes (in in.): 1/2, 3/4, 1, 1-1/4, 1-1/2, and 2.
Connections: Union on inlet and outlet: External NPT
threaded or sweat.
Capacity: See Table 1.
Screen Sizes:
Shipped with Device: 100 microns.
Available Kits: 20, 50, and 200 microns.
NOTE: 20 microns = 900 mesh (approximate).
50 microns = 350 mesh (approximate).
100 microns = 175 mesh (approximate).
200 microns = 70 mesh (approximate).
MV876 Automatic-Backwash Controls:
Models:
MV876B1000: Valve with 24 Vac motor and timer replaces ball
valve drain port for automatic backwash at preprogrammed
intervals. 24V transformer not included. For use with
F76A,G Filters only.
MV876B1018: Bayonet mounted shaft of 24 Vac motor and
timer replaces ball valve manual control for automatic
backwash at preprogrammed intervals. 24V transformer
not included. For use with F76S Filters only.
Specifications:
Power: 4 VA.
Current: 170 mA.
Voltage: 24 Vac.
Cycle time: 20 seconds (approximate).
Timer: Variable. See Table 2.
Accessories (for F76S only except where noted):
0900747 Sump O Ring Kit (10 O rings) for 1/2 to 1-1/4 in. F76S.
0900748 Sump O Ring Kit (10 O rings) for 1-1/2 to 2 in. F76S.
0901444 Gasket Package (10 gaskets) for any 1/2 in. and
3/4 in. F76.
0901445 Gasket Package (10 gaskets) for any 1 in. F76.
0901446 Gasket Package (10 gaskets) for any 1-1/4 in. F76.
0901447 Gasket Package (10 gaskets) for any 1-1/2 in. F76.
0901448 Gasket Package (10 gaskets) for any 2 in. F76.
AF11S-1A Screen insert (100 microns) for 1/2 to 1-1/4 in. F76S.
AF11S-112A Screen insert (100 microns) for 1-1/2 to 2 in. F76S.
AF11S-1B Screen insert (20 microns) for 1/2 to 1-1/4 in. F76S.
AF11S-112B Screen insert (20 microns) for 1-1/2 to 2 in. F76S.
AF11S-1C Screen insert (50 microns) for 1/2 to 1-1/4 in. F76S.