Honeywell GNS-XL - Manual (Page 134)

System Operation
3-19 GNS-X L Flight Management System
Rev. 4
Nov/04
3. ENT Key - DEPRESS to display DEPARTURE Page.
4. DEPARTURE Airport Identifier - VERIFY or INSERT valid ident.
NOTE: If the first waypoint on the Flight Plan is an airport, the
Departure ident prefills and the cursor is positioned over the first SID
identifier on the list.
If the first waypoint on the Flight Plan is a runway, the RUNWAY field
also prefills and the cursor is over the first SID identifier on the list.
If there are no SIDs associated with the Departure Airport, the mes-
sage
“NO SIDS AVAILABLE” appears and the ident field flashes.
Depress the FPL Key to return to the Active Flight Plan.
5. Line Select Key - DE-
PRESS to position the
cursor over the desired
SID, if required. (Figure
3-23)
6. ENT Key - DEPRESS to
select SID.
NOTE: Cursor moves to the
first
TRANSITION identifier
on the list. The TRANSITION
field is highlighted in yellow.
7. Line Select Key -
DEPRESS to position
cursor over the desired
TRANSITION,
if required.
(Figure 3-24)
8. ENT Key - DEPRESS to
select TRANSITION.
NOTE: If the SID and TRAN-
SITION are runway depen-
dent, and a runway has not
prefilled, the cursor moves to
<
RUNWAY ------
SID ------
TRANSITION ------
BANGR1
BLUTI1
ELMAA5?
SUMMA5
DEPARTURE KSEA 1/1
>
>
Figure 3-23
<
RUNWAY ------
SID ELMAA5
TRANSITION ------
CVO
HQM ?
UBG
DEPARTURE KSEA 1/1
>
>
<
Figure 3-24