Honeywell GNS-XL - Manual (Page 149)

System Operation
3-34 GNS-X L Flight Management System
Rev. 0
Oct/96
10. Approach Waypoints -
REVIEW (Figure 3-57),
then DEPRESS ENT Key
to insert APPROACH into
Active Flight Plan and
return to the ACTIVE
FLIGHT PLAN Page.
REVIEWING AN
APPROACH FROM A
STORED FPL OR THE
ACTIVE FPL PAGE
1. Line Select Key -
DEPRESS to position cur-
sor over the APPROACH
field on the FLIGHT PLAN
Page.
2. ENT Key - DEPRESS to
review
APPROACH
(Figure 3-58)
3. BACK Key - DEPRESS to
return to FLIGHT PLAN
Page.
NOTE: SELECT will not appear as an option since an APPROACH
already exists in the Flight Plan.
EDITING AN APPROACH FROM A STORED FPL OR THE ACTIVE
FPL PAGE
1. Line Select Key - DEPRESS to position cursor over the APPROACH
field on the FLIGHT PLAN Page.
2. ENT Key - DEPRESS to display APPROACH Page.
The RUNWAY, TYPE, or TRANSITION may be edited by pressing the
Line Select Key next to the field to be edited. That field will turn from
green to yellow and the previous information will turn to dashes. Alternate
options may be available depending on the information in the remaining
two fields.
The most efficient way to edit an approach procedure is to change the
RUNWAY, TYPE, and TRANSITION fields to dashes (------).
RUNWAY RW35
TYPE NDB
TRANSITION COBUS
WPTS OF APPROACH:
IAF WAIVE MAP RW17
CANB ++++++
PT CANB HP CANB
CANB
SELECT? ERASE
APCH KEWK 1/1
>
>
<
Figure 3-58
RUNWAY RW35
TYPE NDB
TRANSITION WAIVE
WPTS OF APPROACH:
IAF WAIVE MAP RW17
CANB ++++++
PT CANB HP CANB
CANB
SELECT? ERASE
APCH KEWK 1/1
>
>
<
Figure 3-57