Honeywell GNS-XL - Manual (Page 153)

System Operation
3-36.2 GNS-X L Flight Management System
Rev. 2
Apr/00
NOTE: If the pair is not
valid, the COMPANY
ROUTES page will remain,
and a ROUTE NOT FOUND
message will be displayed.
(Figure 3-59d) If the route is
valid, but the Active FPL is
full, an ACTIVE FPL FULL
message is displayed.
(Figure 3-59e) A WPT MEM
FULL MESSAGE will be dis-
played if the waypoint mem-
ory is full.
NOTE: The Company
Route can be selected either
by the preceding method
using an Origin/Destination
city pair, or by selecting LSK
L4 and entering the route
number.
5. If the selected city pair
has more than one VIA,
the first one will be dis-
played. (Figure 3-59f)
6. Use the PRV, NXT, or
BACK keys to scroll
through the list of VIAs
(Figure 3-59g)
7. ENT Key - DEPRESS.
The ACTIVE FLIGHT
PLAN page is now dis-
played with the waypoints
of the pair added.
COMPANY ROUTES 1/1
<
>
>
ORIGIN KCOF
DESTINATION KSMX
VIA ------
R#------
ROUTE NOT FOUND
Figure 3-59d
COMPANY ROUTES 1/1
<
>
>
ORIGIN KCOF
DESTINATION KEFD
VIA LAL
R#017
ACTIVE FPL FULL
Figure 3-59e
COMPANY ROUTES 1/1
<
>
>
ORIGIN KCOF
DESTINATION KSMY
VIA COVIA?
R#018
Figure 3-59f
COMPANY ROUTES 1/1
<
>
>
ORIGIN KCOF
DESTINATION KSMY
VIA TLH?
R#019
Figure 3-59g