Honeywell GNS-XL - Manual (Page 157)

System Operation
3-39 GNS-X L Flight Management System
Rev. 0
Oct/96
12. Approach Waypoints - REVIEW.
13. ENT Key - DEPRESS ACTIVE FPL Page is displayed. VERIFY
the approach appears as selected.
14. Waypoint Sequencing - Edit, if required, based on assigned route.
EXECUTING A GPS/GPS OVERLAY APPROACH
NOTE: To fly a full procedure DME ARC or Procedure Turn, either
coupled or using own navigation, follow the FMS and
EFIS/Instrument displays.
USING RADAR VECTORS TO FINAL APPROACH COURSE
1. FPL key - DEPRESS to
display the ACTIVE FPL
Page. (Figure 3-62)
2. Approach and Waypoint
Sequencing - VERIFY
they appear as selected.
3. MSG Key - VERIFY
approach is armed within
30NM of the airport and
the HSI scaling output
has changed to TRMNL
on NAVIGATION Page 2.
4. FMS Mode - SELECT or
VERIFY the appropriate
mode for guidance if
required.
5. Flight Director or
Autopilot - ENGAGE the
appropriate mode if
required.
6. HDG Key - DEPRESS to
display the HEADING
VECTOR Page. (Figure
3-63)
7. Heading - INSERT as assigned by ATC.
KEED - KPRC
EED
DRK
KPRC
DEPART
ARRIVE ETA
APPROACH? ERASE
ACTIVE FPL 1/1
<
<
<
<
<
>
Figure 3-62
HDG 155
CANCEL
TO DRK DTK 197
ENTER HDG
HEADING VECTOR 1/1
<
Figure 3-63