Honeywell GNS-XL - Manual (Page 158)

System Operation
3-40 GNS-X L Flight Management System
Rev. 1
Jul/98
8. ENT Key - DEPRESS
twice to engage Heading
Select mode. (Figure 3-
64)
After receiving the final
intercept vector from
ATC:
9. HDG Key - DEPRESS to
display the HEADING
VECTOR Page. (Figure
3-65)
10. ENT Key - DEPRESS.
11. BACK Key - DEPRESS
to display INTERCEPT?
12. ENT Key - DEPRESS
cursor moves to the TO
field.
13. BACK Key - DEPRESS
until the FAF waypoint is
displayed.
14. ENT Key - DEPRESS cursor moves to the DTK field.
15. Final Approach Course - INSERT if a Procedure Turn type
approach or VERIFY if any other type approach.
16. ENT Key - DEPRESS twice.
17. CDI Display - VERIFY the HSI course needle slews to the final
approach course or manually select the course.
18. Approach Annunciator - When over the FAF, VERIFY annuncia-
tion and the HSI scaling output has changed to APPR on NAVI-
GATION Page 2.
HDG 155
INTERCEPT ?
FAF
TO DRK DTK 125
HEADING VECTOR 1/1
>
<
<
<
Figure 3-65
HDG 155
HDG SELECT ?
TO DRK DTK 197
HEADING VECTOR 1/1
>
<
<
<
Figure 3-64