Honeywell GNS-XL - Manual (Page 180)

System Operation
3-62 GNS-X L Flight Management System
Rev. 1
Jul/98
4. BACK Key - DEPRESS to
display the INTERCEPT?
prompt. (Figure 3-105)
5. ENT Key - DEPRESS.
The cursor moves to the
TO field.
6. BACK Key - DEPRESS
until the FAF waypoint is
displayed.
7. ENT Key - DEPRESS.
8. Enter the inbound final approach course in the DTK field if required.
9. ENT Key - DEPRESS Twice to return to Navigation Page 1.
NAVIGATION Page 1 will be displayed with the TO waypoint, the
FAF, and waypoint previous to the FAF in the FR field if no manual
DTK was entered. The system will now intercept the Final
Approach course and sequence to the MAP.
NOTE: If an intercept is programmed to a FAF that is part of a
Procedure Turn the DTK must be manually entered. This will cause
PSEUDO VORTAC to be displayed on NAV Page 1.
HDG 205
INTERCEPT ?
FAF
TO DRK DTK 125
OK? ENTER
HEADING VECTOR 1/1
>
<
<
<
Figure 3-105