Honeywell GNS-XL - Manual (Page 184)

System Operation
3-66 GNS-X L Flight Management System
Rev. 0
Oct/96
EDITING
5. Line Select Key - DEPRESS to position cursor over desired field.
a. INSERT value for INBOUND CRS, LEG TIME, or LEG DIST
or
b. BACK Key - DEPRESS to change TURN DIR or EXIT
MODE.
6. ENT Key - DEPRESS. The OK? ENT prompt will appear.
NOTE: A re-entry to the Holding Pattern must be flown if the
Inbound Course or Turn Direction are changed while holding at the
HP Waypoint. No XFILL capability is available to the other system in
a dual system installation from one or both systems when a holding
pattern is in progress.
7. ENT Key - DEPRESS to return to the NAVIGATION, DIRECT
TO, or FPL Page.
CANCELING
1. Line Select Key -
DEPRESS to position
the cursor over the
CANCEL?
prompt.
(Figure 3-111)
2. ENT Key - DEPRESS.
The HP annunciation is
erased from NAVIGA-
TION, DIRECT TO, and
FPL Pages.
NOTE: If canceling holding pattern at the current TO Waypoint, HP
or AT is replaced by “TO”.
EXITING A HOLDING PATTERN
This procedure gives the pilot three options to exit a Holding Pattern:
exiting the next time over a holding fix, going Direct To the holding fix,
or performing a Leg Change.
AT CAP (USA)
DIRECT ENTRY
INBOUND CRS 013
MAX HOLDING TAS 259
TURN DIR RIGHT
LEG TIME 1.0
LEG DIS (3.2)
EXIT MODE MANUAL
CANCEL ?
HOLDING PATTERN 1/1
>
>
>
>
Figure 3-111