Honeywell GNS-XL - Manual (Page 218)

System Operation
3-100 GNS-X L Flight Management System
Rev. 0
Oct/96
To update the TRIP PLAN leg to the current TO waypoint with
an Active Flight Plan selected:
a. Line Select Key - DEPRESS to position cursor over TRIP
PLAN field.
b. ENT the letter [A] in the cursor.
c. ENT Key - DEPRESS twice to display information in the data
fields.
NOTE: If an offset waypoint is in the TO field the OFFSET WPT
Page will appear. The ENT Key must be depressed again.
The TRIP PLAN leg will display DIRECT TO the current NAVIGA-
TION Page TO waypoint.
Selecting another display page (other than MSG and FUEL PLAN)
and returning to the TRIP PLAN Page will also update the leg with
DIRECT TO the current NAVIGATION Page TO waypoint.
FLIGHT PLAN FUEL PLANNING
The FUEL PLAN Page provides the capability to calculate fuel con-
sumption information for Active or Stored Flight Plans, DIRECT TO
Legs or Random Legs without affecting any of the system’s naviga-
tion functions.
The Fuel Plan Number and Origin and Destination identifiers,
TO/FROM leg and groundspeed value on this page will be identical
to the TRIP PLAN Page. Changing GS or the current leg on the
FUEL PLAN Page also affects the TRIP PLAN Page. Pilot initiated
changes made to the FLOW field on the FUEL STATUS Page are
reflected on the FUEL PLAN Page.
1. PLAN Key - DEPRESS to display FUEL PLAN Page.
NOTE: Initially the FUEL
PLAN will display the Active
Flight Plan (if selected). The
initial leg displayed will be
DIRECT TO the current TO
waypoint from NAV page 1.
(Figure 3-164)
2. Line Select Key -
DEPRESS to position
the cursor over the
FUEL PLAN field.
FUEL PLAN A
DIRECT KDAL
TO LIT KHPN
GS 434
FLOW 1200
LEG FUEL 271
FPL FUEL 2938
REM @ KHPN 1264
>
>
<
PLAN 3/8
Figure 3-164