Honeywell GNS-XL - Manual (Page 243)

System Operation
3-125 GNS-X L Flight Management System
Rev. 0
Oct/96
Aircraft Not Equipped With A TRUE/MAG Switch
NOTE: This procedure must be accompanied by the input of TRUE
heading into the system.
1. NAV Key - DEPRESS until NAVIGATION Page 3 appears.
2. LINE SELECT Key - DEPRESS to place cursor over the VAR
field.
3. INSERT E0.
4. ENT Key - DEPRESS.
NOTE: The Variation is now E0 and the system will be referenced to
TRUE north. There will be no T annunciation adjacent to BRG, HDG
and TK.
SET HEADING ENTRY
When an IRS is placed in the
Attitude Mode the message
ENTR SET HDG appears on
the SENSOR MESSAGES
Page. It is necessary to
enter a set heading in order
to allow the IRS to output
valid magnetic heading data.
To Enter A Set Heading:
1. NAV Key - DEPRESS
until NAVIGATION Page
3 is displayed. The
heading field may
appear as dashes.
(Figure 3-198)
2. Line Select Key -
DEPRESS to place the
cursor over HDG field.
The last valid heading
value appears. (Figure
3-199)
3. HDG - VERIFY or INSERT.
4. ENT Key - DEPRESS
FR ABQ 01:09
TO‘ PGS 01:57
DRIFT R 002
VAR E 12
TAS 420
HDG ---
BRG 219
TK 267
NAVIGATION 3/4
<
<
>
>
Figure 3-198
FR ABQ 01:09
TO‘ PGS 01:57
DRIFT R 002
VAR E 12
TAS 420
HDG 269
BRG 219
TK 267
NAVIGATION 3/4
<
<
>
>
Figure 3-199