Honeywell GNS-XL - Manual (Page 324)

To Manually Print All Messages:
1. From the AFIS MENU, select the SEND AFIS MSG page.
2. On the send message page, leave the TO and FR fields blank.
At the address (#) field, type ONE of the following commands:
MSG 1 Send messages to printer one.
MSG 2 Send messages to printer two.
MSG 3 Send messages to both printers.
3. Press ENTER until the SEND MESSAGE? prompt is displayed.
Press ENTER again to initiate printing to the specified printer(s).
PRINTING WEATHER
SIGMETS, Winds Aloft, and Terminal Weather may be printed auto-
matically or manually.
To Automatically Print SIGMETS, Winds Aloft, and Terminal
Weather Upon Receipt:
1. Select AUTO PRINT WX from the AFIS OPERATING MODES,
PRINTER CONTROL page. All SIGMETS, Winds Aloft, and
Terminal Weather reports will print automatically as they are
received.
To Manually Print All SIGMETS, Winds Aloft, or Terminal
Weather:
1. From the AFIS MENU, select the SEND AFIS MSG page.
2. On the send message page, leave the TO and FR fields blank.
At the address (#) field, type ONE of the following commands
(note- there is a space between the command and the numeral,
ex. SIG<space>1):
SIG 1 Send SIGMETS to printer one.
SIG 2 Send SIGMETS to printer two.
SIG 3 Send SIGMETS to both printers.
WND 1 Send Winds Aloft to printer one.
WND 2 Send Winds Aloft to printer two.
WND 3 Send Winds Aloft to both printers.
7-58 GNS-X L Flight Management System AFIS Operation
Rev. 3
Oct/02