Step 1: configure ultrakey lite to videoblox mode, Step 2: configure videoblox network settings, Figure 3-8 – Honeywell ULTRAKEY LITE HJC5000 User Manual
Page 42: Figure 3-9, System configuration tab
42
Installing UltraKey Lite with VideoBloX
Figure 3-8
UltraKey Lite Login Page
Step 1: Configure UltraKey Lite to VideoBloX Mode
1.
Log into the web browser.
2.
From the top menu, click the Configuration tab. See
.
3.
From the side menu, click the System Configurations tab.
4.
From the System Mode drop down list, select VideoBlox.
5.
From the System Language drop down list, select English or French.
6.
From the Background Light drop down list select ON or OFF.
7.
Click Apply to save the configuration, Cancel to exit without saving or Default to
restore all factory default values.
Figure 3-9
System Configuration Tab
Step 2: Configure VideoBloX Network Settings
1.
From the side menu, click VideoBloX Configuration. See
.
2.
Under Keyboard ID Setting, enter a number between 1 and 32 to set the controller
ID.