Honeywell ULTRAKEY LITE HJC5000 - Manual (Page 65)

Document 800-07422 Rev A 65
08/10
5
System Administration and Troubleshooting
In this section:
• System Administration Using the Controller LCD , page 65
• System Administration Using the Web Browser , page 68
System Administration Using the Controller LCD
To navigate all configuration LCD menus, see Figure 5-3 on page 70 .
Logging in and Navigating to the System Set: Config Menu
1. If not already done, install and connect the controller to a power source.
The UltraKey Lite LCD displays.
2. From the home screen, press Alt > Clr to enter the Password menu.
3. Enter the PIN password 3434, then click Enter or Login.
The System Set: Mode screen displays.
Setting the Screen Language
1. Log into the controller.
2. From the System Set: Config menu, press the LCD
up/down arrow keys to scroll to Language. Press Ent.
3. Press the LCD up/down arrow keys to scroll through the
options and select English or French. Press Ent to save.
Configuration
Language