Front and back view, Hw1000i model – Honeywell HW2000i User Manual

Page 14

Advertising
background image

Front and Back View

8

www.honeywellgenerators.com

HW1000i / HW2000i Inverter Generator Owner’s Manual

Front and Back View

Front and Back View

HW1000i Model

A—Control Panel

1.

Outlets

125VAC outlet(s) (NEMA 5-15R [HW1000i model] and NEMA
5-20R [HW2000i model]) to connect 120V appliances to gen-
erator for power.

DC outlet ranges from 12 to 18 volts and is unregulated. This
outlet should not be used for battery charging.

2.

Ground Terminal

Connects generator to ground wire for grounding protection.

3.

Breakers

Protect circuits from damage caused by
overload or short-circuit by stopping flow
of electricity from generator to the appli-
ance. If there is no power at outlets, see
“Troubleshooting” on page 27.

4.

Overload Indicator Light

Illuminates red when the generator is overloaded or if there is
a short circuit in a connected appliance. Turn the generator
off immediately and determine the reason for the overload.

5.

Output Indicator Light

Illuminates green when the generator is running under nor-
mal operating conditions.

6.

Oil Alert Indicator Light

Illuminates red when low oil conditions are present and the
generator is running (

or while recoil is pulled). The engine

will automatically stop to prevent generator damage.

A

D

B

C

2

4

7

8

6

1

5

3

G

E

F

H

J

NEVER use unapproved DC cables as this can
result in circumstances leading to death, serious
injury, and property damage. ALWAYS use Honey-
well DC accessory cables (sold separately) available
from a Honeywell dealer.

Generator must be grounded to prevent electrical
shock from faulty appliances. See page 6.

WARNING

CAUTION

Set

Tripped

DC

AC

Advertising