Hitachi SERIES J - Manual

Instructions – Parts List
GRACO INC.ąP.O. BOX 1441ąMINNEAPOLIS, MNą55440-1441
Copyright 1996, Graco Inc. is registered to I.S. EN ISO 9001
15:1 Fire-Ball
R
300 Pumps
For pumping petroleum–based undercoating material.
2700 psi (18.6 MPa, 186 bar) Maximum Working Pressure
180 psi (1.2 Ma, 12 bar) Maximum Air Input Pressure
Model No. 206405, Series K
35 lb. pail size
Model No. 206699, Series J
120 lb. drum size
Model No. 206700, Series J
400 lb. drum size
306531AD
Table of Contents
Warnings 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operation 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maintenance 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Troubleshooting Guide 12 . . . . . . . . . . . . . . . . . . .
Air Motor Service 13 . . . . . . . . . . . . . . . . . . . . . . . .
Displacement Pump Service 16 . . . . . . . . . . . . . .
Parts 18 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Mounting Hole Layout 23 . . . . . . . . . . . . . . . . . . . .
Dimensional Drawings 23 . . . . . . . . . . . . . . . . . . .
Technical Data 23 . . . . . . . . . . . . . . . . . . . . . . . . . .
Graco Warranty 24 . . . . . . . . . . . . . . . . . . . . . . . . .
Graco Phone Numbers 24 . . . . . . . . . . . . . . . . . . .
04208B
WARNING
This product is designed to be used for pumping
non-corrosive and non-abrasive fluids only. Any
other use can cause unsafe operating conditions
and result in component rupture, fire, or explosion,
which can cause serious injury, including skin
injection.
Model 206405 Shown
Important Safety instructions
Read all warnings and instructions in this manual.
Save these instructions.