Storage, Storage preparation – HONDA Outboard Motor BF135A User Manual

Page 80

Advertising
background image

78

STORAGE PREPARATION

Cleaning and Flushing

STORAGE

FLUSH PORT
CONNECTOR

Cleaning

Flushing With a Garden Hose
(commercially available)

Do not run the motor when f lushing
the motor with a garden hose or the
motor may be damaged.

Proper storage preparation is
essential for keeping your outboard
motor troublefree and looking good.
The following steps will help to keep
rust and corrosion from impairing
your outboard motor’s function and
appearance, and will make the engine
easier to start when you use the
outboard motor again.

Thoroughly clean and flush the
outboard motor with fresh water after
operation in dirty water or salt water.

Touch up any damaged paint, and
coat areas that may rust with Honda
Corrosion Inhibitor, or equivalent.
Lubricate controls with a silicone
spray lubricant.

Wash the outside of the outboard
motor with clean, fresh water, and
flush the cooling system as follows.

For safety, remove the emergency
stop switch clip so the engine cannot
be started while you are standing near
the propeller.

Remove the flush port connector.

1.

04/01/21 11:21:08 31ZY6600_079

Advertising